System Configuration |
|
CPU |
RK3399 |
Main frequency |
Quad-core A53(1.4GHz) + Dual-core A72(1.8GHz) |
RAM |
2GB or 4GB, up to 4GB |
Memory |
4GB/8GB/16GB emmc optional, standard 16GB |
Power IC |
Use RK808, support dynamic frequency modulation, etc. |
Interface parameters |
|
LCD |
Support MIPI, EDP, HDMI interface output at the same time |
Touch |
Capacitive touch |
Audio port |
AC97/IIS interface, support audio recording |
SD card |
2 way SDIO output channels |
EMMC |
Onboard emmc interface, the pins are not drawn out separately |
Ethernet |
Support Gigabit Ethernet |
USB HOST2.0 |
2 way HOST2.0 |
USB HOST3.0 |
2 way TYPE3.0 |
UART |
5 way serial ports, support serial ports with flow control |
PWM |
4 way PWM outputs |
IIC |
7 way IIC outputs |
SPI |
1 way SPI output |
ADC |
1 way ADC output |
Camera |
1 way BT656/BT601, 1 way MIPI output |
HDMI |
High-definition audio and video output interface, audio and video synchronization output |
Electrical characteristics |
|
Main 3.3V input voltage |
3.3V/4.3A (3.3V/5A input recommended) |
Secondary 3.3V input voltage |
3.3V/300mA (cannot be mixed with main 3.3V) |
The output voltage |
1.8V (can be used for backplane power supply, 0V after sleep) |
Operating temperature |
0~70 degrees |
Storage temperature |
-10~40 degrees |
Structural parameters |
|
Exterior |
stamp hole method |
Core board size |
55mm*55mm*3mm |
Pin spacing |
1.0mm |
Lead pad size |
0.5mm*1.8mm,The package is symmetrical about the center |
Number of pins |
200PIN |
Laminate |
8 floors |
Warpage |
less than 0.5% |
Hardware Interface Introduction |
||
Label |
Name |
Describe |
【1】 |
USB HOST |
HOST2.0 |
【2】 |
USB HOST |
HOST3.0 |
【3】 |
EDP |
EDP |
【4】 |
TF |
TF deck |
【5】 |
TYPEC |
TYPEC interface, compatible with OTG function |
【6】 |
BEEP |
buzzer |
【7】 |
HDMI OUT |
HDMI Output Interface |
【8】 |
LOAD |
HDMI IN Chip program burning port |
【9】 |
HDMI IN |
HDMI input interface |
【10】 |
SIM card slot |
3G、4G phone card slot |
【11】 |
USB HOST |
HOST2.0 |
【12】 |
USB HOST |
HOST2.0 |
【13】 |
USB HOST |
HOST2.0 |
【14】 |
Backlight driver |
LCD backlight driver interface |
【15】 |
LCD voltage selection |
16, 17 mark the level selection of the display interface, 3.3V or 5V |
【16】 |
MIPI DSI |
Screen connected to MIPI interface, FPC interface |
【17】 |
MIPI DSI |
Screen connected to MIPI interface, pin header interface |
【18】 |
MIPI CSI |
MIPI camera interface |
【19】 |
Touch screen interface |
I2C capacitive touch screen interface |
【20】 |
Serial port |
UART0, TTL level |
【21】 |
Button interface |
6PIN PH seat, button signal connection seat |
【22】 |
UART2 |
Serial port 2, TTL level, default debugging serial port |
【23】 |
UART4 |
UART4, TTL level interface |
【24】 |
GPIO |
Extended GPIO port |
【25】 |
Speaker interface |
External two-channel speakers |
【26】 |
Speaker interface |
External two-channel speakers |
【27】 |
MIC |
Headset jack |
【28】 |
LINE IN |
udio input interface |
【29】 |
LINE OUT |
headphone jack |
【30】 |
FAN |
Cooling fan power interface |
【31】 |
RTC |
RTC battery holder |
【32】 |
GMAC |
Gigabit Ethernet interface |
【33】 |
Infrared receiver |
HS0038 Infrared Integrated Receiver |
【34】 |
DC OUT |
12V power output |
【35】 |
DC IN |
12V DC power input |
【36】 |
PCIE |
PCIE interface connected to 3G and 4G modules |
【37】 |
WIFI、BT |
6221A-SRC, dual-band WIFI/BT module |
i3399 motherboard driver list |
||||
driver \ system |
linux4.4.52 + android7.1 |
linux4.4 + QT5.6 |
linux4.4.5 + debian9 |
linux4.4.5 + ubuntu16.04 |
7 inch MIPI screen (1024*600) |
● |
● |
● |
● |
EDP screen |
● |
● |
● |
● |
Backlight driver |
● |
● |
● |
● |
PMIC driver |
● |
● |
● |
● |
Capacitive touch |
● |
● |
● |
● |
EMMC driver |
● |
● |
● |
● |
SD card driver |
● |
● |
● |
● |
Independent button |
● |
● |
● |
● |
ADC driver |
● |
● |
● |
● |
Buzzer driver |
● |
● |
● |
● |
Infrared remote control |
● |
● |
● |
● |
Switch machine |
● |
● |
● |
● |
Wake up from hibernation |
● |
● |
|
|
4-way USB HOST2.0 driver |
● |
● |
● |
● |
1 way USB HOST3.0 driver |
● |
● |
● |
● |
One way TypeC (OTG) driver |
● |
● |
● |
● |
Audio (ES8388) |
● |
● |
● |
● |
Recording (ES8388) |
● |
|
|
|
LINE IN(ES8388) |
● |
● |
● |
● |
SDIO Dual Band WIFI/BT4.0 |
● |
● |
● |
● |
CSI camera driver |
● |
● |
|
|
USB camera driver |
● |
● |
● |
● |
Serial port |
● |
● |
● |
● |
HDMI OUT |
● |
● |
● |
● |
HDMI IN |
● |
|
|
|
4G module (PCIE interface) |
● |
|
|
|
Gigabit Ethernet |
● |
● |
● |
● |
Download (SDK Source, Upgrade Tool, Firmware, Hardware DataSheet):
https://drive.google.com/open?id=0B-yeuBKFw_hMWERLcW5XWXR3Mkk
Wiki: https://youyeetoo.com/blog/
Forum: bbs.youyeetoo.com
ExpertSupport: [email protected]
Payment
1. If the payment is not available, your order will be closed automatically.
2. Seller are responsible for any insurance, problems and damage which caused by shipping service such accidents, delays or other issues.Besides the buyer should to be responsible for any tax and/or dutycharged by their country.
Shipping Choice
Self-Help Shipping Guide
Shipment
1. All item will be shippedwithin 48 hours on receipt of cleared payment.(The earlier you pay, the earlier we ship your order.)
2. If you need faster shipment, please choose DHL or EMS or FedEx IP(Shipping fare paid by yourself). Or we will deliver via the default method.
3. Please make sure that your shipping address is 100% correct.
4. We ship items to worldwide with delivery time guarantee.
Contact us
1.If you have any requestplease don't hesitate to contact us at first time we will help you and solve your issue within 24 hours.
2. All emails will be answered within 1 business day. If you do not receive our reply, please kindly re-sent your email and we will reply you as soonas possible.
3. Warranty services are for replacements only, any problem please kindly email us frist, we will accept your advise & request.
Return&Refund
1.Refund or resendnew for any orders due to the product quality problem.
2.We accept any unused itemin its original package as return within 7 days of delivery. Buyers must provide the tracking number, specific reason forthe return.
3. if it's buyer' s reason lead to the return package, buyers need to pay for round shipping fare.
4. We will refund to buyer after we receive the returns in its original condition package. Or buyers could choose to have a replacement.
FeedBack
1.As your feedback is really important to us, please take a few minute to leave the positive feedback if you are satisfied with our products and service .Also we will do the same for you ASAP. Thanks!
2. Please don't hesitate to contact usbefore you leaving negative or neutralfeedback. We will try our best to resolve your problem and meet your need.