Jetson Nano/Raspberry Pi 8MP Camera Module V2 , IMX219, Compatible with Raspberry pi 3 Module / B+ and Tinker Board

 Notice:   
    This 8MP camera can work with Raspberry Pi 3 Module B ,Raspberry Pi 3 Module
 B+  and ASUS Tinker Board.

This is  8MP camera module that capable of 1080p video and still image, and it can connect to Raspberry Pi directly with CSI (Camera Serial Interface).
When you connect to the CSI port on Raspberry Pi via ribbon cable, and then boot the latest version of Raspbian and you are good to go with the camera. It’s a fixed focus 8MP sensor capable of 3280x2464 stills, but also 1080p30, 720p60 and 640x480p60/90.

• 8MP sensor
• Wider image, capable of 3280x2464 stills, 1080p30 video and so forth
• Small and light

• 1080p video supported

• CSI(Camera Serial Interface)

• Size: 25 x 23 x 9 mm

• Very light, ~ 3g

• Compatible with Raspberry Pi A+,B,B+/2, 3 

With Raspberry pi

With Tinker Board / Tinker board S

 .

• 1x Camera module 

• 1x Ribbon Cable 

Recommend Accessories:

Getting Started with Pi Camera:https://projects.raspberrypi.org/en/projects/getting-started-with-picamera