Banana Pi BPI-RV2 - RISC-V Openwrt Router - 1x 2.5GbE, 5x GbE RJ45 Port

• Quick Start: https://docs.banana-pi.org/en/BPI-RV2/GettingStarted_BPI-RV2
• Tips

Introduction

Banana Pi BPI-RV2 open source gateway is a device based on Siflower SF21H8898 SoC, 1 × 2.5G WAN network interface, 5 Gigabit LAN network interface, onboard 512MB DDR3 memory, 128 MiB NAND, 16 MiB NOR, M.2 interface, MINI PCIE and USB 2.0 interface, etc.

Features

• Siflower SF21H8898 4-core RISC-V processor
• With Siflower NPU, enterprise-class gateway-level data forwarding processing capability can be achieved.
• 512MB DDR3 RAM
• 1 x 2.5GbE network and 5 x giga port
• 128 MB SPI NAND and 16 MB SPI NOR flash Ensure that the onboard system is indestructible，
  M.2 2242/2230 interface support NVMe SSD (PCIe gen 2 x1)
• RTC
• PoE Network power support

Shipping List

1x BPI-RV2 router Or 1x BPI-RV2 Router with poe

Specification

• SoC – Siflower SF21H8898 quad-core 64-bit RISC-V @ 1.25GHz
• System Memory – 512MB DDR3
• Storage
  • 128 MB SPI NAND Flash for U-Boot and Linux
  • 16 MB SPI NOR flash for U-Boot and Linux; write protected by default (protection can be disabled with jumper)
  • M.2 2230/2242 (PCIe Gen2 x1) socket for NVMe SSD
• Networking
  • 2.5GbE RJ45 port
  • 5x gigabit Ethernet RJ45 ports
  • Optional WiFi and Bluetooth via mPCIe module
  • Optional 4G LTE/5G via M.2 socket plus Nano SIM card slot
• USB – USB 2.0 Type-A USB HOST port
• Expansion
  • M2 Key-B socket (PCIe Gen2 x1 + USB 2.0) for NVMe SSD, 5G cellular module, etc…
  • mini PCIe socket (PCIe Gen 2 x1) for WiFi module, wired network card, etc…
  • 26-pin GPIO header
• Debug – USB-C port or 3-pin connector via serial console access
• Misc
  • Reset and user buttons
  • LEDs – CPU, KEYB, and MPCIE
  • RTC with CR1220 battery holder
  • Boot selection: NAND (default) or NOR via jumper
• Power Supply –
  • 12V/3A via 5.5/2.1mm power barrel jack
  • Optional 802.3at/af PoE module providing power through the 2.5GbE port
• Dimensions – 148 x 100.5 mm

Detailed Descriptions