+ Provide one-to-one technical support.

+ If there is a need for a customised AI product, please give us your feedback. It may be possible to get direct support from ASUS IOT.

Note：If you need European or American power, please leave a message.Thank you.

This is New Verson of Tinker board S, name Tinker board S R2.0

Tinker board and Tinker board S will launch a new version R2.0

The main changes are as follows：
1. Modify the main control RK3288 model
Change from RK3288-C to RK3288CG-W (higher performance, but the original firmware is not compatible, you need to use the new firmware)
2. WIFI chip change
Change from Realtek RTL8723BS to Realtek RTL8723DS, (drive is not the same, the original firmware is not compatible, you need to use the new firmware)
3. Supported system version update

To sum up, the R2.0 update is more powerful, but the firmware is not compatible with the previous version of the firmware. The new motherboard has to use the new firmware.
Details for future OS support:

Bundle 1： 2G LPDDR3+Heat Sink

Bundle 2： 2G LPDDR3+TF Card+Acrylic Case+Cooling Fan+Power Supply+Micro USB Cable+Heat Sink

Bundle 3： 2G LPDDR3+Metal Case+Cooling Fan+Power Supply+Micro USB Cable+Heat Sink+Screws

Bundle 4： 2G LPDDR3+TF Card+Metal Case+Cooling Fan+Power Supply+Micro USB Cable+Heat Sink+Screws

Bundle 5： 2G LPDDR3+8MP Camera Module+Power Supply+Micro USB Cable+Heat Sink

Bundle 6： 2G LPDDR3+10.1 inch touch Screen+Power Supply+Micro USB Cable+Heat Sink

​

The new and improved Tinker Board S R2.0 is a single board computer (SBC) that offers greater durability, better stability and an overall improved user experience for DIY enthusiasts and makers everywhere.

Better User Experience

Always Moving Forward with Makers

• Onboard power-on pin for makers giving more freedom when bringing their ideas to life.
• Enhanced I2S pin with Slave mode and an improved software API for better compatibility

CPU Performance 
Tinker Board S features an ARM-based RK3288 SoC and is equipped with four cores to enhance multithread application performance. It operates at frequencies of up to 1.8GHz, improving performance across all applications. This increase in CPU core count, along with an increase in processor frequency, helps to enable significantly faster performance across a wide range of applications, extending and enhancing project capabilities. As a result, typical PC tasks are faster and more responsive.

• Class Leading Performance

With its powerful and modern quad-core ARM-based processor — the Rockchip RK3288 — Tinker Board S offers significantly improved performance versus other popular SBC boards. To provide the flexibility needed for different builds and projects, Tinker Board S features 2GB of LPDDR3 dual-channel memory and is equipped with an onboard 16GB eMMC and SD 3.0 interface that offer significantly faster read and write speeds for the OS, applications and file storage.

Tinker board S is a single-board computer in an ultra-small form factor that offers class-leading performance while leveraging outstanding mechanical compatibility. The tinker board offers makers, IoT enthusiasts, hobbyists, PC DIY enthusiasts and others a reliable and extremely capable platform for building and tinkering ideas into reality.

• GPU Performance

Featuring a powerful but energy-efficient design, Tinker Board S supports next-generation graphics and GPU computing API's. Powered by an ARM-based Mali-T760 MP4 GPU, Tinker Board S' GPU and fixed-function processors allow for a wide range of uses, including high-quality media playback, gaming, computer vision, gesture recognition, image stabilization and processing, as well as computational photography and more.
Tinker Board S has HDMI CEC hardware circuit implemented, with the supported software, it allowing multimedia enthusiasts to control TV outputs using a single remote control for a better entertainment experience. Other fixed functions include H.264 and H.265 playback support, as well as HD and UHD video playback.* 

​ ​

• HD Audio Quality

Further improving on key areas found lacking on many SBC boards, Tinker Board S is equipped with an HD codec that supports up to 24-bit/192kHz audio. Its integrated audio jack supports audio output and a microphone in, without an extension module. The audio jack also offers hassle-free plug-in detection so it automatically switches the audio output to an audio jack when the speaker or headset is connected.

• Maker-Friendly, with loT Connectivity 

Tinker Board S also features Gbit LAN for Internet and network connectivity. A dedicated bus resource designed for the LAN port ensures consistent Ethernet performance. The integrated Wi-Fi and Bluetooth controller on the Tinker Board S is shielded with a metal cover to ensure minimal interference and improved radio performance. An integrated IPEX antenna header allows for easy antenna replacement or upgrades.
Tinker Board S also features a full-size HDMI output. Additionally, it includes four USB 2.0 ports for extensive peripheral and accessory connectivity.

​

•  Enhanced DIY Design

  Careful consideration went into the design and development of the Tinker Board S to ensure that it provides a superior user experience for first-time builders or for seasoned hobbyists. Builders will appreciate the color-coded GPIO header, which makes it easy to recognize respective pin headers.
  The PCB dimensions and topology of the Tinker Board S align with standard SBC boards, allowing support for a wide range of chassis and physical accessories. The PCB features silk-screening with a connection header and location callouts, for improved connection clarity. The onboard MIPI headers also feature color-coded pull tabs.
  Tinker Board S also includes a heatsink, which helps improve heat dissipation under heavy loading or in hot ambient environments.
  

• TinkerOS ‧ Supported OS‧ Applications 

A Debian-based distribution ensures a smooth and functional experience, directly out of the box. Whether it's browsing the web, watching videos, or writing scripts, TinkerOS is a great starting point for your next project or build.

TinkerOS also includes a number of popular applications allowing for easy programming and development. These include IDLE / Python as well as Squeak / Scratch.
Beyond TinkerOS and its Debian Linux offering Tinker Board S also support the Android Operating system. This allows for an entirely different usage scenarios ranging from media playback, gaming, and much more.
Tinker Board S is also working closely with a wide range of popular applications to enable support & optimize functionality.

• Power Supply 

The Tinker Board S requires 5V/2~3A power via the micro-USB port. The exact amount of current (mA) the Tinker Board S requires will depend on what's connected to it. For general use, a 2A power supply from a reputable retailer will provide ample power to run your tinker board.Typically, Tinker Board S uses between 700 to 1000mA, depending on which peripherals are connected. It may use as little as 500mA when no peripherals are attached. Maximum power for the Tinker Board S is 1A. If you need to connect a USB device to bring power requirements above 0.5A, then you must connect to it via an externally powered USB hub.

• USB

• GPIO

One powerful feature of the Tinker Board S is row of available GPIO (general purpose input/output) pins along the edge of the board. These pins are a physical interface between the Tinker Board S and the outside world. At the simplest level, you can think of them as switches that can be turned on or off. Of the 40 pins, 28 are GPIO pins (shared with SPI/UART/I2C pins). The Tinker Board S is equipped with one SPI bus that offers two chip selects. The SPI bus is available on the onboard 40-pin header.

[   Large Inventory   ]

[   Official Sole Agnecy ]

Note：If you need European or American power, please leave a message.Thank you.

Bundle 1:

1x Tinker Board S R2.0

1x Heat Sink

Bundle2 & Bundle3 & Bundle4& Bundle5 & Bundle6

1x Tinker Board S R2.0

1x Heat Sink ---gift

1x 5V-3A Power Adapter --gift

1x Micro USB Cable --gift

1x TF Card (Depend on your order)

1x Acrylic Case (Depend on your order)

1x Metal Case   (Depend on your order)

1x Cooling Fan  (Depend on your order)

1x 8MP Camera Module   (Depend on your order)

1x 7inch Touch Screen      (Depend on your order)

1x 10.1 inch LCD Touch Screen   (Depend on your order)

Recommend Accessories:

​