For downloading the Tools, Driver and Firmware use the following link:
https://youyeetoo.com/blog/banana-pi-bpi-m2-pro-bpdpm2pro001-130
BPI-M2 Pro Introduction
Banana Pi BPI-M2 Pro is the next generation single board computer from Banana Pi in 2021. It is powered by Amlogic S905X3 quad-core Cortex-A55 (2.0 XXGHz) processor.Onboard 2GB LPDDR4 memory and 16GB EMMC storage, and supports 2 USB 3.0 interface, a gigabit network port. RT8821CU wifi&BT onboard. 1 HDMI outputBPI-M2 Pro same size as Banana Pi BPI-M2+ , and interface is also same .so can use BPI-M2+ case.
Amlogic S905X3 quad core Cortex-A55 (2.0xxGHz)
Mali-G31 GPU
2GB LPDDR4
16GB eMMC flash
2 USB 3.0
RTL8821CU WiFi&BT 4.2 onboard
1 GbE ethernet
HDMI output
HardWare Specification of Banana pi BPI-M2 Pro |
|||
CPU |
Amlogic S905X3 Quad-Core Cortex-A55 (2.0xxGHz) |
||
GPU |
Mali-G31 MP2 GPU with 4 x Execution Engines (650Mhz) |
||
Memory |
2 GB LPDDR4 |
||
Storage |
MicroSD slot with support for up to 256GB expansion and 16G eMMC flash with support for up to 64GB |
||
Network |
10/100/1000 Mbit/s Ethernet |
||
Wifi&BT |
Dual-band 802.11 b/g/n/ac WiFi 5 1×1 and Bluetooth 4.2 via Realtek RTL8821CU |
||
Video Output(s) |
1 x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID) |
||
Audio Output(s) |
1 x HDMI digital output |
||
USB ports |
2x USB 3.0 host ports, 1x micro USB OTG port |
||
GPIO |
40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). GPIO pins can be used for UART, I2C, SPI or PWM |
||
Switches |
Reset, Power and U-boot |
||
LED |
Power Status and Activity status |
||
Power Source |
5 volt @3A via DC port |
||
Size & Weight |
65mm×65mm, 58g |
||
OS |
Android and Linux |
BPI-M2 Pro VS BPI-M5 VS Odroid C4 VS RPI 4 |
|||||
|
Banana Pi BPI-M2 Pro |
Odroid C4 |
Raspberry Pi 4 |
||
Processor |
Amlogic S905X3 Quad-Core Cortex-A55 ARMv8.2-A 64-bit 1.5GHz |
Amlogic S905X3 Quad-Core Cortex-A55 ARMv8.2-A 64-bit 1.5GHz |
Amlogic S905X3 Quad-Core Cortex-A55 ARMv8.2-A 64-bit 1.5GHz |
Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz |
|
GPU |
Mali-G31 MP2 GPU |
Mali-G31 MP2 GPU |
Mali-G31 MP2 GPU |
Broadcom VideoCore VI |
|
RAM |
2GB LPDDR4 |
4GB LPDDR4 |
DDR4 4GiB with 32-bit bus width |
2GB, 4GB or 8GB LPDDR4-3200 SDRAM |
|
Storage |
micro SD card slot & 16GB eMMC flash on board |
micro SD card slot & 16GB eMMC flash on board |
micro SD card slot , eMMC connector for option |
micro SD card slot, non EMMC |
|
Network |
1 GbE ,WiFi&BT5.0 onbard |
GbE ,Optional WiFi USB dongle |
GbE |
GbE, 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE |
|
Video Output |
1 x HDMI 2.1 (up to 4K@60Hz with HDR, CEC, EDID) |
1 x HDMI 2.1 (up to 4K@60Hz with HDR, CEC, EDID) |
1 x HDMI 2.1 (up to 4K@60Hz with HDR, CEC, EDID) |
2 × micro-HDMI 2.0 |
|
Audio Output |
1 x HDMI digital output |
3.5mm jack and 1 x HDMI digital output |
Optional SPDIF optical output |
3.5 mm anal ogue audio-video jack |
|
DSI |
N/A |
N/A |
N/A |
2-lane MIPI DSI display port |
|
CSI |
N/A |
N/A |
N/A |
2-lane MIPI CSI camera port |
|
USB |
USB 3.0 x 2 1 Micro USB 2.0 |
USB 3.0 x 4 TYPE C |
USB 3.0 x 4, 1 x Micro USB 2.0 port (OTG) |
2 USB 3.0 ports; 2 USB 2.0 ports; |
|
Power |
5 volt @3A via DC power |
5 volt @3A via Micro USB (TYPE C) |
1 x DC power jack (Outer diameter : 5.5mm, inner diameter : 2.1mm) |
5V DC via USB-C connector (minimum 3A*) |
|
IR |
Yes |
Yes |
Yes |
N/A |
|
GPIO |
40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). |
40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). |
40 x GPIO pins |
40-pin GPIO header, populated |
|
Button |
Reset, user and U-boot |
Reset, user and U-boot |
N/A |
N/A |
|
LED |
Power Status and Activity status |
Power Status and Activity status |
Power Status and Activity status |
Power Status and Activity status |
|
Dimensions & weight |
65mm x 65mm,58g |
85mm x 56mm, 48g |
85mm x 56mm 59g |
88 mm × 58 mm, 46 g |
|
System Support |
Linux & Android |
Linux & Android |
Linux & Android |
Linux & Android |
GPIO Pin Name |
Default Function |
Function2 |
Function3 |
CON1-P01 |
VCC-3V3 |
|
|
CON1-P02 |
VCC5V |
|
|
CON1-P03 |
GPIOX_17 |
I2C_M2_SDA |
|
CON1-P04 |
VCC5V |
|
|
CON1-P05 |
GPIOX_18 |
I2C_M2_SCL |
|
CON1-P06 |
GND |
|
|
CON1-P07 |
GPIOX_5 SDIO_CMD |
|
|
CON1-P08 |
GPIOX_12 |
UART_A_TX |
|
CON1-P09 |
GND |
|
|
CON1-P10 |
GPIOX_13 |
UART_A_RX |
|
CON1-P11 |
GPIOX_3 SDIO_D3 |
|
|
CON1-P12 |
GPIOAO_8 |
TDMB_SCLK |
|
CON1-P13 |
GPIOX_4 SDIO_CLK |
|
|
CON1-P14 |
GND |
|
|
CON1-P15 |
GPIOX_7 PWM_F |
|
|
CON1-P16 |
GPIOX_0 SDIO_D0 |
|
|
CON1-P17 |
VCC-3V3 |
|
|
CON1-P18 |
GPIOX_1 SDIO_D1 |
|
|
CON1-P19 |
GPIOX_8 PCM_DIN |
|
|
CON1-P20 |
GND |
|
|
CON1-P21 |
GPIOX_9 PCM_DOUT |
|
|
CON1-P22 |
GPIOX_2 SDIO_D2 |
|
|
CON1-P23 |
GPIOX_11 |
PCM_CLK |
|
CON1-P24 |
GPIOX_10 |
PCM_SYNC |
|
CON1-P25 |
GND |
|
|
CON1-P26 |
GPIOX_16 |
PWM_E |
|
CON1-P27 |
GPIOA_14 |
I2C_M3_SDA |
|
CON1-P28 |
GPIOA_15 |
I2C_M3_SCL |
|
CON1-P29 |
GPIOX_14 |
UART_A_CTS |
|
CON1-P30 |
GND |
|
|
CON1-P31 |
GPIOX_15 |
UART_A_RTS |
|
CON1-P32 |
GPIOX_19 |
PWM_B |
|
CON1-P33 |
GPIOX_6 PWM_A |
|
|
CON1-P34 |
GND |
|
|
CON1-P35 |
GPIOAO_7 |
TDMB_FS |
|
CON1-P36 |
GPIOH_5 SPDIF_IN |
|
|
CON1-P37 |
GPIOAO_7 |
I2S_MCLK |
|
CON1-P38 |
GPIOAO_10 |
TDMB_DIN |
SPDIF_OUT |
CON1-P39 |
GND |
|
|
CON1-P40 |
GPIOAO_4 |
TDMB_DOUT |
|
CON2-P1 |
GND |
CON2-P2 |
UART0-RX |
CON2-P3 |
UART0-TX |
[Tech-support]
Wiki: https://youyeetoo.com/blog/
Forum: bbs.youyeetoo.com
ExpertSupport: [email protected]
Payment
1. If the payment is not available, your order will be closed automatically. 2. Seller are responsible for any insurance, problems and damage which caused by shipping service such accidents, delays or other issues.Besides the buyer should to be responsible for any tax and/or dutycharged by their country.
Shipping Choice
Self-Help Shipping Guide
Shipment
1. All item will be shippedwithin 48 hours on receipt of cleared payment.(The earlier you pay, the earlier we ship your order.) 2. If you need faster shipment, please choose DHL or EMS or FedEx IP(Shipping fare paid by yourself). Or we will deliver via the default method. 3. Please make sure that your shipping address is 100% correct 4. We ship items to worldwide with delivery time guarantee
Contact us
1.If you have any requestplease don't hesitate to contact us at first time we will help you and solve your issue within 24 hours. 2. All emails will be answered within 1 business day. If you do not receive our reply, please kindly re-sent your email and we will reply you as soonas possible. 3. Warranty services are for replacements only, any problem please kindly email us frist, we will accept your advise & request.
Return&Refund
1.Refund or resendnew for any orders due to the product quality problem. 2.We accept any unused itemin its original package as return within 7 days of delivery. Buyers must provide the tracking number, specific reason forthe return. 3. if it's buyer' s reason lead to the return package, buyers need to pay for round shipping fare. 4. We will refund to buyer after we receive the returns in its original condition package. Or buyers could choose to have a replacement.
FeedBack
1.As your feedback is really important to us, please take a few minute to leave the positive feedback if you are satisfied with our products and service .Also we will do the same for you ASAP. Thanks! 2. Please don't hesitate to contact usbefore you leaving negative or neutralfeedback. We will try our best to resolve your problem and meet your need.